home about us tech tips faq employment what's new contact
  Home > Tech Tips

 

Tech Tips


Use this comprehensive information library whenever you need helpful hints from car repair professionals. Whether you are a professional or a DIY mechanic, you’re sure to find the tips you need to insure a job well done. Click here to go back to the previous page any time during your search.

 

Electrical System

Influences on Spark Plug Temperatures/Performance

Below is a list of some of the possible external influences on a spark plug's operating temperatures. The following symptoms or conditions may have an effect on the actual temperature of the spark plug. The spark plug cannot create these conditions, but it must be able to cope with the levels of heat...if note, the performance will suffer and engine damage can occur.

Air/Fuel Mixtures seriously affect engine performance and spark plug operating temperatures.

  • Rich air/fuel mixtures cause tip temperatures to drop, causing fouling and poor driveability
  • Lean air/fuel mixtures cause plug tip and cylinder temperature to increase resulting in pre-ignition, detonation, and possibly serious spark plug and engine damage
  • It is important to read spark plugs many times during the tuning process to achieve optimum air/fuel mixture

Higher Compression Ratios/Forced Induction will elevate spark plug tip and in-cylinder temperatures

  • Compression can be increased by performing any one of the following modifications:
    • reducing combustion chamber volume (i.e. domed pistons, smaller chamber heads, milling heads, etc.)
    • adding forced induction (Nitrous, Turbocharging or Supercharging)
    • camshaft change
  • As compression increases, a colder heat range plug, higher fuel octane, and careful attention to ignition timing and air/fuel ratios are necessary. Failure to select a colder spark plug can lead to spark plug/engine damage.

ADVANCING IGNITION TIMING

  • Advancing ignition timing to 10° causes plug tip temperature to increase by approx. 70° - 100°C.

ENGINE SPEED AND LOAD

  • Increases in firing-end temperature are proportional to engine speed and load. When traveling at a consistent high rate of speed, or carrying/pushing very heavy loads, a colder heat range spark plug should be installed.

AMBIENT AIR TEMPERATURE:

  • As air temperature falls, air density/air volume becomes greater, resulting in leaner air/fuel mixtures.
  • This creates higher cylinder pressures/temperatures and causes an increase in the spark plug's tip temperature. So, fuel delivery should be increased.
  • As temperature increases, air density decreases, as does intake volume, and fuel delivery should be decreased.

HUMIDITY

  • As humidity increases, air intake volume decreases
  • Result is lower combustion pressures and temperatures, causing a decrease in the spark plug's temperature and a reduction in available power.
  • Air/fuel mixture should be leaner, depending upon ambient temperature.

BAROMETRIC PRESSURE/ALTITUDE

  • Also affects the spark plug's tip temperature.
  • The higher the altitude, the lower cylinder pressure becomes. As the cylinder temperature decreases, so does the plug tip temperature.
  • Many mechanics attempt to "chase" tuning by changing spark plug heat ranges.
  • The real answer is to play with jetting or air/fuel mixtures in an effort to put more air back into the engine.

Go back